Karadent by TCS Large 25mm
Pack of 5 large 25mm cartidges of Karadent™ resin.
*Compatible only with machines designed for 25mm cartridges.
Karadent™ is semi-rigid, microcyrstalline polymer thermoplastic used for the fabrication of full dentures, semi-flexible partial dentures, frameworks, and nightguards.
Description
- Pack of 5 cartridges of Karadent resin
- *Compatible only with machines designed for 25mm cartridges.
- Diameter of cartridge: 25 mm
- Large: Length of cartridge: 9.7 cm
- ~26 grams of resin per cartridge
- Available in 3 translucent shades:
- Standard Pink (Shade 2)
- Dark Pink (Shade 4)
- Natural (Shade N) – clear shade
- Made in USA
Includes delivery bags, patient care pamphlets, *sample of TCS Fresh Denture Cleaner (*only in the USA)
For fabricating full and partial dentures using any TCS Injection System or any injection system compatible with 25mm diameter cartridges.
Melt resin according to manufacturer's instructions for type of furnace being utilized.
- For TCS Hydraulic Injector and TCS Digital Furnace melt resin at 550ºF (288ºC) for 15-16 minutes.
- For TCS Automatic Air Injector set temperature display to 320ºC for 15-16 minutes, 150-165 PSI. TCS strongly recommends avoiding any automatic air injector (including our unit) to inject Karadent, due to density of the resin and inconsistent results.
It is recommended to wax 2.5 mm thick and inject into a hot flask.
TCS EZ Flow is not recommended for Karadent.
Karadent resin:
- Microcrystalline polymer
- Ideal for full dentures, semi-flexible partials, frameworks and nightguards
- Lightweight and durable
- No volume shrinkage for exceptional fit
- Monomer free and hypoallergenic
- BPA free
- An upgrade from traditional acrylic
- Easy to finish and polish - like acrylic
- Stain resistant and easy to maintain
- Repairable with re-injection (with its same material)
- Rebasable
TCS EZ Flow is not recommended for Karadent.
TCS strongly recommends avoiding any automatic air injector (including our unit) to inject Karadent, due to density of the resin and inconsistent results.
Keep in a dry location, free from air exposure. Once removed from sealed plastic bag, store in a dry place and at 90ºF to 100ºF (32ºC to 38ºC) at all times or at least 12 hours prior to use.
Insurance codes:
- D5225 Maxillary Partial Denture
- D5526 Mandibular Partial Denture
- D5100 Maxillary Complete Denture
- D5120 Maxillary Complete Denture